Additional Details


Ethics: It is the responsibility of the authors to assure that all clinical investigations detailed in manuscripts submitted to the journal are conducted in accordance with the World Medical Association Declaration of Helsinki (www.wma.net/en/30publications/10policies/b3/index.html). All case reports must include a statement indicating that informed consent has been obtained from the patient or appropriate persons for publication, including any necessary photographs. An example of such a statement would be “The patients and/or their families were informed that data from the case would be submitted for publication and gave their consent.” Do not use patients’ names, initials, institutional ID numbers, or other identifying information. Articles, including their study design, originating from a particular institution are assumed to be submitted with the approval of the requisite authority on ethical issues. Articles describing research involving human subjects must include a statement in the Materials and methods section indicating that approval was given by the institutional review board (IRB) or Ethics committee of the institution and that informed consent was obtained from each patient or candidate. Manuscripts reporting animal experiments must include a statement in the Materials and methods section indicating that approval was obtained from the institutional review board and that animal care complied with the guidelines of the authors’ institution or any national law on the care and use of laboratory animals.

Consent: This section is compulsory. It should provide a statement to confirm that the patient has given their informed consent for the case report to be published. You do not need to send the form to us on submission, but we may request to see a copy at any stage, including after publication.

Patient Consent form: Download here

Acknowledgments: Please acknowledge anyone who contributed towards the study by making substantial contributions to conception, design, acquisition of data, or analysis and interpretation of data, or who was involved in drafting the manuscript or revising it critically for important intellectual content, but who do not meet the criteria for authorship.


After Acceptance: Upon acceptance of your article, your article will be processed and you will receive the proofs. You will also receive a separate e-mail for other requirements.

Proofreading: The purpose of the proof is to check for typesetting or conversion errors and the completeness and accuracy of the text, tables, and figures. Substantial changes in content, e.g., new results, corrected values, title, and authorship, are not allowed without the approval of the Editor. After online publication, further changes can only be made in the form of an erratum, which will be hyperlinked to the article.

Online First (Ahead of Print): The article will be published online after receipt of the corrected proofs. This is the official first publication citable with the DOI. After the release of the printed version, the paper can also be cited by issue and page numbers.


Abbreviations: If abbreviations are used in the text they should either be defined in the text where first used, or a list of abbreviations can be provided.

References: Authors are responsible for verifying the accuracy and completeness of the references. The number of references should not exceed 50. The style of the references should follow the MEDLINE/ PubMed Journal Article Citation Format found at the National Center for Bibliography Information [NCBI] Website where specific reference citations can be searched for. Abbreviations of journal names must conform to those used in MEDLINE/PubMed. Avoid using abstracts as references. In the references, do not list personal communications and unpublished material (including oral and poster presentations and manuscripts not yet accepted for publication).
All references must be numbered consecutively, in square brackets, in the order in which they are cited in the text, followed by any in tables or legends. The must be no more than 50 references listed,
e.g. For an article within a journal :
Bentolila V, Nizard R, Bizot P, Sedel L. Complete traumatic brachial plexus palsy. Treatment and outcome after repair. J Bone Joint Surg Am 1999;81:20-8.

For a book chapter, or article within a book e.g Songcharoen P. Neurotization in the treatment of brachial plexus injury. In: Omer G, Spinner M, van Beek A, editors. Management of peripheral nerve problems. Philadelphia: W.B. Saunders; 1998. p. 459-64.
If a non-English-language reference is listed, the original language should be indicated, as shown in the following sample:

Journal article not in English:
Otani T, Hayashi S, Ueno Y, Hayashi H, Kato T, Tamegai H, Fujii K. Long-term radiographic evaluation of muscle release operation for arthritis of the hip: a comparison study between the results of muscle release and the natural history of osteoarthritis. Rinshou Seikeigeka (Clinical Orthopaedic Surgery) 2004;39:921–6 (in Japanese).

[One of the best methods would be to get the reference from PubMed using the Summary text feature]

  • Step 1: Put the full title of the article in PubMed search
  • Step 2: On the abstract page on the upper right hand, click on ‘Abstract’ to open a drop-down
  • Step 3: Select Summary Text from the drop-down
  • Step 4: white page with only reference format opens. Select the reference up to the page number and copy-paste in your manuscript

For more details about Reference, formatting refers to the PDF file here

Statistics: Statistical methods should be described with sufficient details at the end of Materials and Methods to enable a knowledgeable reader with access to the original data to verify the reported results. When possible, quantify findings and present them with appropriate indicators of measurement error or uncertainty (such as confidence intervals).

Tables: To be added to the blinded manuscript after the references. Tables should be given a brief, informative title and numbered consecutively in the order of their citation in the text. Type each table double spaced on a separate page. Use the table function in MICROSOFT WORD, not spreadsheets, to make tables. Tables must be no larger than a single sheet of A4 paper. The table number and title should appear above the table, and the definition of all abbreviations, levels of statistical significance, and additional information should appear below the table.
Preparing tables:
Each table should be numbered in sequence using Arabic numerals (i.e. Table 1, 2, 3, etc.). Tables should also have a title that summarizes the whole table, maximum 15 words. Detailed legends may then follow, but should be concise.
Smaller tables considered to be integral to the manuscript can be pasted into the document text file. Such tables should be formatted using the ‘Table object’ in a word processing program to ensure that columns of data are kept aligned when the file is sent electronically for review.
Tabular data provided as additional files can be uploaded as an Excel spreadsheet (.xls) or comma-separated values (.csv). As with all files, please use the standard file extensions.

Figures : (Provide in a separate word file) Figures should be provided separately and should be uploaded in scripture as additional files. Figure legend has to be included in the blinded manuscript after tables. Please site figures in the text in rounded brackets (Fig 1A). Include an internal scale in any micrographs or provide the magnification in the caption (wherever appropriate). Professionally produced arrows should be used to highlight the photograph’s message and the illustration should be of a professional standard. If photographs of persons are used, either the subjects must not be identifiable or the subject’s or guardian’s written permission to use the photograph must accompany the manuscript.

Preparing illustrations and figures:
Please note that the International Journal Of Paediatric Orthopaedics (IJPO) can only publish ten figures in each article. If you have more than ten figures and feel that all are essential to the understanding, please make this clear in your covering letter, explaining why the figures are needed. Figures and tables should be sequentially referenced. Authors should include all relevant supporting data with each article.
Figures should be provided as separate files and should not be included in the main text of the submitted manuscript or include within them the figure legend. Each figure should comprise only a single file. There is no charge for the use of color.  Authors should make every effort to preserve the anonymity of the patient by removing or concealing any identifiable features, including birthmarks and tattoos. Please take extra care with images of the head and face, ensuring that only the relevant features are shown. Publication of facial images will be subject to approval by the Editor-in-Chief.

Formats :
The following file formats can be accepted:
EPS (preferred format for diagrams)
PNG (preferred format for photos or images)
TIFF
JPEG
HIGH-RESOLUTION PICTURES ARE NECESSARY

Figure legends: No more than 10 figures per article are accepted. For each figure, the following information should be provided: Figure number (in sequence, using Arabic numerals – i.e. Figure 1, 2, 3, etc); short title of figure (maximum 15 words); detailed legend, up to 300 words. Figures should be provided as separate files. The legends should be included in the main manuscript text file rather than being a part of the figure file. The legend should include a brief description of the exact location of the image of the patient, the type of image (e.g. micrograph/x-ray), and time in relation to progression e.g. one week after surgery. There must be no abbreviations unless they are expanded (excluding common abbreviations such as antibodies).

Please note that it is the responsibility of the author(s) to obtain permission from the copyright holder to reproduce figures or tables that have previously been published elsewhere.

Colour Illustrations: Online publication of colour illustrations is free of charge. Please note that, in such cases, it is the authors’ responsibility to prepare figures to be illustrative enough to convey the necessary information even after they are converted into black and white.


Style and language : General: Currently, the International Journal Of Paediatric Orthopaedics (IJPO) can only accept manuscripts written in English. Spelling should be US English or British English, but not a mixture.
It is essential that submitted manuscripts have a high standard of written English. Manuscripts that are poorly written will be returned to authors for revision prior to peer review. Authors are advised to write clearly and simply and to have their articles checked by colleagues before submission. Non-native speakers of English may choose to make use of a copyediting service before submission.
International Journal Of Paediatric Orthopaedics (IJPO) will copy-edit accepted manuscripts before they are published. The editing is designed only to correct such things as misused words, spelling errors, missing references, or incomplete citation information.

Typography: How to write the manuscript
– Please use double line spacing.
– Type the text justified, without hyphenating words at line breaks.
– Abbreviations spelt out in full for the first time.
– Numerals from 1 to 10 spelt out.
– Numerals at the beginning of the sentence spelt out.
– Use hard returns only to end headings and paragraphs, not to rearrange lines.
– Capitalize only the first word, and proper nouns, in the title.
– All pages should be numbered.
– Use the International Journal Of Paediatric Orthopaedics (IJPO) reference format.
– Footnotes to the text should not be used.
– Greek and other special characters may be included. If you are unable to reproduce a particular special character,        please type out the name of the symbol in full.
– Gene names should be in italic, but protein products should be in plain type.
– Please ensure that all special characters used are embedded in the text, otherwise, they will be lost during manuscript processing.
– Genes, mutations, genotypes, and alleles should be indicated in italics, and authors are required to use approved gene symbols, names, and formatting. Protein products should be in plain type.
– Units – SI Units should be used throughout (liter and molar are permitted, however).

Artwork Guidelines: How to write the manuscript

– Electronic figure submission

  • Supply all figures electronically.
  • Indicate what graphics program was used to create the artwork.
  • For vector graphics, the preferred format is EPS; for halftones, please use TIFF format. MS Office files are also acceptable.
  • Vector graphics containing fonts must have the fonts embedded in the files.
  • Name your figure files with “Fig” and the figure number, e.g., Fig1.eps.

– Line art

  • Definitions: Black and white graphic with no shading.
  • Do not use faint lines and/or lettering, and check that all lines and lettering within the figures are legible at final size.
  • All lines should be at least0.1 mm (0.3 pt) wide.
  • Scanned line drawings and line drawings in bitmap format should have a minimum resolution of 1200 dpi.
  • Vector graphics containing fonts must have the fonts embedded in the files.

-Halftone art

  • Definition: Photographs, drawings, or paintings with fine shading, etc.
  • If any magnification is used in the photographs, indicate this by using scale bars within the figures themselves.
  • Halftones should have a minimum resolution of300 dpi.

-Combination art

  • Definition: a combination of halftone and line art, e.g., halftones containing line drawing, extensive lettering, colour diagrams, etc.
  • Combination artwork should have a minimum resolution of 600 dpi.

-Colour art

  • Colour art is free of charge for online publication.
  • If black and white will be shown in the print version, make sure that the main information will still be visible. Many colours are not distinguishable from one another when converted to black and white. A simple way to check this is to make a xerographic copy to see if the necessary distinctions between the different colours are still apparent.
  • If the figures will be printed in black and white, do not refer to colour in the captions.
  • Colour illustrations should be submitted as RGB (8 bits per channel).

-Figure lettering

  • To add lettering, it is best to use Helvetica or Arial (sans-serif fonts).
  • Keep lettering consistently sized throughout your final-sized artwork, usually about 2–3 mm (8–12 pt).
  • The variance of type size within an illustration should be minimal, e.g., do not use 8-pt type on an axis and 20-pt type for the axis label.
  • Avoid effects such as shading, outline letters, etc.
  • Do not include titles or captions in your illustrations.

-Figure numbering

  • All figures are to be numbered using Arabic numerals.
  • Figures should always be cited in the text in consecutive numerical order.
  • Figure parts should be denoted by lowercase letters (a, b, c, etc.).
  • If an appendix appears in your article/chapter and it contains one or more figures, continue the consecutive numbering of the main text. Do not number the appendix figures, “A1, A2, A3, etc.” Figures in online appendices (Electronic supplementary material) should, however, be numbered separately.

-Figure captions

  • Each figure should have a concise caption describing accurately what the figure depicts. Include the captions in the text file of the manuscript, not in the figure file.
  • Figure captions begin with the term Fig. in bold type, followed by the figure number, also in bold type.
  • No punctuation is to be included after the number, nor is any punctuation to be placed at the end of the caption.
  • Identify all elements found in the figure in the figure caption; and use boxes, circles, etc., as coordinate points in graphs.
  • Identify previously published material by giving the original source in the form of a reference citation at the end of the figure caption.

-Figure placement and size

  • When preparing your figures, size figures to fit in the column width.
  • For most journals, the figures should be 39 mm, 84 mm, 129 mm, or 174 mm wide and not higher than 234 mm.

For any queries contact at editor.ijpo@gmail.com